- LevelIntermediate
- Time4-6 hours
- Hook2.5 mm
- YarnWorsted
About This Pattern
There is something quietly cheerful about a doll built entirely from single crochet and magic rings, and this one has that warmth from the first round. It is the kind of make that feels like it is telling a small, tidy story: a head, a body, tiny shoes, a hat with hair tucked underneath. I love a pattern that stays this friendly while still asking you to pay attention.
Your hands will spend most of their time in the single crochet increase rhythm, shaping the head and body as one continuous piece over fourteen rounds. Then they shift gears for the legs and arms, working back loops only across a simple chain, which is a nice change of texture. By the time you reach the shoes, dress, and hat, you are counting increases in small bursts rather than long stretches.
Set this doll on a shelf, a windowsill, or tucked into a child's bed and it holds its own without shouting for attention. The dress and hat give it a finished, dressed-up look rather than a bare amigurumi shape. It reads as handmade in the best way, personal and a little bit loved already.
- Start the head and body together as a single continuous piece worked from the top down in one piece.
- Shape the increases round by round until the body reaches its widest point, then work back down.
- Chain and work the legs and arms separately in back loops only, making four matching pieces.
- Crochet two shoes from magic rings, shaping them with increases before finishing the tops.
- Work the dress in its own set of rounds, building it to slip over the doll's body.
- Crochet the hat and prepare the hair pieces so they can attach together as one unit.
- Attach the legs and arms to the body first, positioning them before adding any outerwear.
- Dress the doll, add the shoes, and finish by placing the hat with its attached hair on the head.
On the desk
- Crochet Hook: 2.5 mm
Yarn
- 50g of preferred yarn (multiple colors: main body, hair, dress, and accessories)
Notions
- Yarn needle
- Scissors
- Stitch marker
- Stuffing
Stitch shorthand
- st — stitch
- sts — stitches
- sl st — slip stitch
- sc — single crochet
- hdc — half double crochet
- dc — double crochet
- inc — increase
- dec — decrease
Crochet amigurumi doll with dress, shoes, and hat
Head & Body (Worked as One Piece)
- Round 1
Start with a magic ring and make 6 single crochet (sc). Slip stitch to join and chain 1.
- Round 2(12)
2 sc in each stitch around (12 sc).
- Round 3
1 sc, inc repeat around (18 sc). Slip stitch and chain 1.
- Round 4
2 sc, inc repeat around. Slip stitch and chain 1.
- Round 5
3 sc, inc repeat around (30 sc). Slip stitch and chain 1.
- Round 6(32)
Sc in next 14 sts, inc in the next. Repeat the pattern once more (32 sts).
- Rounds 7–14
Sc in each stitch around (8 rounds).
- Round 15
Dec, 2 sc repeat around. Slip stitch and chain 1.
- Round 16
Dec, 1 sc repeat around.
- Rounds 17–18
Sc in each stitch around.
- Round 19
3 sc, inc repeat around.
- Round 20
Sc in each stitch around.
- Rounds 21–41
Sc in each stitch around.
- Round 27
Within body 2 sc, (dec, 1 sc) x3 , then 2 sc, (dec, 2 sc) x3 . Closing: Fasten off and sew the bottom of the doll closed with a yarn needle. Leave it neat and secure for attaching legs.
Legs & Arms (Make 4 Identical Pieces)
Start: Chain 13.
- Round 1(12)
Skip the first chain. Slip stitch (sl st) in back loops only across (12 sl st total).
Shoes (Make 2)
- Round 1
Magic ring, 6 sc inside. Pull to close, sl st to join, chain 1.
- Round 2
1 sc, 1 sc, inc repeat once (total 8 sts). Sl st and chain 1.
- Round 3
Sc in every stitch around.
- Round 4
3 sc, inc repeat twice.
- Rounds 5–6
Sc in every stitch.
- Round 7
2 decreases, then 6 sc.
- Round 8
Sc around.
Dress
- Round 1
Chain 20.
- Round 2(19)
Skip first chain, sc in each of the remaining (19 sc).
- Round 3
Skip first stitch, sc, inc, inc, sc . Sleeve 1: 3 double crochet (dc) in same stitch, repeat once more in next stitch.Step by step: Body Front: 1 sc, 5 increases (2 sc in each of next 5 stitches), 1 sc. Sleeve 2: 3 dc in same stitch, repeat once more in next stitch. Back Body: 1 sc, 2 increases (2 sc in next 2 sts), 1 sc. Chain 1, turn.
- Round 4
Skip first stitch, sc in next 6 stitches. Sleeve Join: Chain 2, skip 6 sts, sc in 7th stitch.Step by step: Front Body: 12 sc. Sleeve Join: Chain 2, skip 6 sts, sc in 7th stitch. Back Body: 4 sc. Chain 1, turn.
- Round 5
Skip first stitch, 6 half double crochet (hdc). Sleeve Chain: 2 hdc in chain space.Step by step: Front Body: 12 hdc. Sleeve Chain: 2 hdc in chain space. Back Body: 6 hdc. Chain 1, turn.
- Round 6
Color Change to Green Work in back ridge loops: 2 dc in next stitch, 1 dc, 1 dc repeat across.Slip stitch and chain 1 at end.
- Rounds 7–8
Dc in back loop only across.
- Round 9
Sl st in every stitch (42 total).
- Round 10
Color Change to Yellow Chain 5, sl st in next stitch. Repeat this all the way around.
Hat
- Round 1
Magic ring, 12 hdc inside. Sl st to join and chain 1.
- Round 2
1 hdc, 1 hdc, inc repeat around. Sl st to join and chain 1.
- Round 3
3 hdc, inc repeat around.
- Round 4
5 hdc, inc , then hdc around.
- Rounds 5–7
35 hdc in each round.
- Round 8
Continue hdc evenly to complete the shape.
Hair (Attached to Hat)
Material: Use brown yarn with same hook size.
Stitching on Back Ridge of Hat: Front Fringe: Chain 4, sl st in next stitch. Repeat across front.
Side and Back Hair: Chain 5, sl st in next stitch. Repeat around remaining edge.
More shots


Where it goes
- A handmade keepsake for a child's shelf, paired with other soft toys rather than played with roughly.
- A thoughtful baby shower or birthday gift, wrapped alongside a small blanket or a picture book.
- A decorative accent for a craft room or nursery, sitting near other fiber art pieces.
- A practice project to build toward a small collection of dolls in different outfit colors.
Care
Hand wash gently in cool water if the yarn gets dusty, then press out excess water in a towel rather than wringing.
Lay the doll flat to dry, gently reshaping the dress and hat while damp so they keep their crocheted form.
Store somewhere dry and out of direct sun, ideally sitting upright so the stuffed body does not flatten over time.
Assembly
- Step 1 Attach legs and arms securely to the body.
- Step 2 Dress the doll in the crocheted dress.
- Step 3 Place the hat with attached hair on the head.
Easy to get wrong
Losing your place across many rounds
Use a stitch marker at the start of every round on the head and body, since it is worked as one long continuous piece with no natural stopping point.
Working legs and arms in the wrong loop
Double check you are catching only the back loop across the chain, since working both loops will hide the ribbed texture the pattern relies on.
Under-stuffing the head and body
Stuff firmly as you close the final rounds so the doll holds its shape once the dress and hat go on top.
Between the songs
- What makes this doll satisfying is how many small skills it stacks in one project without any of them being hard on their own. You get the classic amigurumi build in the head and body, worked as one piece so there is no seaming there. The legs and arms teach you a back-loop-only slip stitch technique that gives them a distinct ribbed look, different from the smooth sc surface everywhere else. Then the shoes, dress, and hat each give you a fresh little shape to finish and attach. By the end you have practiced magic rings, increases, back loops, and simple garment assembly, all in one project you can actually hold in your hand.
Listener questions
Do I need to know amigurumi techniques before starting this doll?
Basic single crochet and increases will get you through the head and body without trouble. The back-loop-only section on the legs and arms is simple but worth trying on a swatch first if it is new to you.
Can I make the hair a different color than shown?
Yes, the hair is worked separately and attached to the hat, so any color you like will work. Just make sure it is a fiber you can secure neatly to the hat piece.
Why are the legs and arms made from a chain instead of a magic ring?
Working them as a flat chain with back-loop-only slip stitches gives a different, slightly ribbed texture from the smooth single crochet body. It also makes four identical pieces quick to produce.
How much yarn do I actually need for all the pieces?
The materials list calls for 50g of yarn across the main body, hair, dress, and accessories, so a small amount in each color goes a long way. Keep leftover scraps handy in case you want to make a second doll in different colors.
What hook size does this pattern use throughout?
A 2.5 mm hook is used for the entire doll, including the body, shoes, dress, and hat. Sticking with one hook size keeps your tension consistent across all the small pieces.
Original pattern: https://crocheteverything.com/crochet-doll-amigurumi-with-dress-shoes-and-hat-pattern-with-outfit-details/
About the Author
Marisol QuinteroWho runs Crochet Obsessed, why a stitch count sits at the end of every round, how a pattern gets written here, and the things this site will never do.



